LINE TO PRODUCE FRUIT AND ORCHARD PRODUCTS BOXES
With production capacity of about 1000 boxes/hour.
Line composed by
- Veener peeling machine M.82 Vr.2
- Rotary cutter M.95
- Stitching machine for bases M.182 Vr.2
- Blockcutter M.268
- Sectioning machine and feeder M.207
- Stitching machine for box front sides M.126 Vr.4
- Stitching machine for frames M.125 Vr.2
- Stitching machine to join bases to frames M.201 Vr.3
- Stitching machine for handles M.227
- Automatic base feeder M.271 Vr.1

POS.01
VENEER PEELING MACHINE M.82
Automatic machine for peeling logs, complete with:
Direct current main motor for progressive increase in speed from 130 to 280 rpm.
Mechanical change in thickness from 0,75 to 6,50 mm (32 thicknesses).
Electronic equipment (PLC) to control the peeling cycles.
Clamp holder shafts (diameter 85 mm) with electro hydraulic devices to transport logs during peeling.
Telescopic clamps (diameter shafts 80-115) with dragging clamps (diameter 90-100-110).
Electro hydraulic devices to transport logs in peeling, possible to use internal clamps only.
2 pairs of clamps (diameter 100 and 120 mm).
Device for rapid opening and closure of pressure bar.
4 marking gauges with retractable blade.
Hydraulic plant (motor kW 5,5).
2 electric pumps for lubrication of the machine’s internal mechanisms.
Machine control cabin.
Electrical cabinet.
Technical specifications:
Dimensions of blade 140x12x950 mm
Diameter of log 180-700 mm
Length of log 300-930 mm
Power rating 85 kW
Note: for safety reasons the machine must always function with the log centring device.
POS.02
ROTARY CUTTER M.95
Automatic machine with 4 blades to obtain small tables and slates from peeled veener, obtaining material to assemble fruit and vegetables wooden boxes. Composed by:
- Continuous variator for the boards cut length from 15 to 120 mm;
- Hydraulic motovariator group to continuosly adjust the machine cut speed to the veener peeling machine;
- 1 conveyor to feed peeled veener into the machine;
- 1 outfeed conveyor with longitudinal profiles to gather the already cut small boards;
Engines and tools of use
POS.03
STITCHING MACHINE FOR BASES M.182
Automatic machine to produce bases with electromagnetic brake-clutch group for stitching control. Reading device on the containers. Programmable counter to determine the stitching points on every single base.
- 4 stitching heads
- Hooks to pick containers up.
- 1 sample container (on request with dimensions to be specified);
- 2,20 kW motor to control chains; mechanical variator changing chains speed from 5 to 2
m./minute;
- Mechanical variator to control the stitching heads, changing the working speed of heads from 160 to 500 stitches/minute; variable linear stitching interval from 40 to 120 mm
- Cabinet with control panel with the electrical and electronic equipment
- Unwinding arm for drums and adjustable unwinding
STACKER FOR BASES M.209
To be positioned at the exit of the stitching machine for bases.
The number of bases per pack and the composition of the pile of bases can both be programmed
electronically.
Complete with accelerator conveyor, supports and automatic ejection of stacked bases.
Technical specifications:
Width of bases 380-600 mm
Length of bases 280-400 mm
Maximum height of pile 320 mm

POS.04
BLOCK CUTTER FOR MULTIPLE BLOCKS M.268
Semi-automatic machine to cut blocks to size for fruit and vegetable boxes. Complete with :
- Surface for placing handles
- Blade group under the work plan
Carriage with alternating movement with geared motor to move handles during the cutting stage
(Note: this operation requires manual help).
Handles must be moved manually after cutting (i.e. moved forward for the next cut).

Technical specifications:
Length of handles 500-3500 mm
Section of handles 28x28 38x38 mm
Length of blocks 60-300 mm
Suction holes n. 1, diameter 150 mm
Power rating 3 kW
Circular blade diameter 300 mm; hole 50 mm; Z n° 72

POS.05
SECTIONING MACHINE AND FEEDER M.207
Automatic sectioning machine and corner feeder into the automatic stitching machine M126,
complete with:
- 1 belt conveyor to feed blocks into sectioning area, with press and metering cylinder
- 1 conveyor with chains and dogs to feed blocks and successively discharge corners into the
stitching machine, controlled by 0,95 KW self-braking motor
- moving cam with hand wheel adjustment to change the position of abandonment of the corner according to the length of the corners
- 2 corners guides with adjustable length to connect to the stitching machine;
- blade motor 7,5 kW;
- 1 circular blade for longitudinal sectioning of blocks;
- Electrical panel with control equipment .

Technical specifications:
Section of strips 28x28 - 38x38 mm
Length of blocks 60-300 mm
Cuts per minute 60
Suction holes n. 1, diameter 150 mm
Power rating 8,50 kW
Compressed air consumption 50 Nl/minute
Circular blade Diameter 300 mm; Hole 70 mm, n. of Z 48

POS.O6
STITCHING MACHINE FOR BOX FRONT SIDES M.126 vr.4
Stitching machine for the box front sides of fruit and vegetable boxes with one or more small boards
consisting of:
- Frame bearing 2 stitching box front sides, operated by brushless motor
- Head oscillation with hand wheel adjustment (with stitching heads moving)
- 2 small boards loaders M250
- Chain conveyor and dogs , controlled by inverter controlled geared motor
- Dogs for stitching the “plateaux” (box front sides with one small board)
- Cabinet with electrical and electronic equipment
- Programme drum (for 3 small boards)
- Dogs for 2 boards stitching head
- Dogs for 3 boards stitching head
- Unwinding arm for drums and adjustable unwinding
Machine connected to block sectioning machine M207
Stitch 7 mm - diameter wire 1,20 mm – oblique cut – feeding 44 mm.
Dogs interval 300 mm
maximum front side height 250 mm
front side length min. 240 mm – max. 400 mm
Machine for plateaux only.

Complete with:
Series of detachable dogs to stitch a front side with 2 small boards (25 pairs+1 spare).
Series of detachable dogs to stitch a front side with 3 small boards (25 pairs+1 spare).
Control drum programmed to stitch a front side with 2 small boards.
Control drum programmed to stitch a front side with 3 small boards.
Complete slats loader group.

POS.07
STITCHING MACHINES FOR FRAMES M.125 Vr.2
Stitching machine for fruit and vegetable boxes with one or more boards, complete with Brushless
motor, consisting of:

Frame bearing 2 stitching heads
- 1 small boards loader M250
- Chain carriage and dogs controlled by geared motor with self-braking motor
- Dogs for stitching “plateau”
- Cabinet containing electrical and electronic equipment
- Programme drum for 3 boards
- Dogs for two board stitching head
- Dogs for three board stitching head
- Unwinding arm for drums and adjustable unwinding
Machine for plateaux only.
Complete with:
Series of dogs to stitch a front sides with 2 small boards (10 pairs +1 spare)
Series of dogs to stitch a front sides with 3 small boards (10 pairs+1 spare)
Control drum programmed to stitch a front side with 2 small boards.
Control drum programmed to stitch a front side with 3 small boards.
Complete slats loader group.

POS.08
STITCHING MACHINE FOR JOINING BASES TO FRAME M.201 Vr.3
AUTOMATIC STITCHING MACHINE FOR BASES M.201-N (connection of bases along the
sides). Automatic machine assembling bases to the “sides”of the frames of fruit and vegetable boxes
with stitches in the corner of the bases, complete with:
- 2 Head/riveting groups with screw and hand wheel adjustment of width , activated by self-braking motors.
- The stroke of the riveting groups ( pneumatically controlled) is adjusted by a mechanical stop according to the height of the corners;
- 2-chains conveyor with 9 pairs of dogs , 800 mm. intervals, to convey bases and frames
- program drum determining the stitching points
- side conveyor with 4 belts for feeding frames with pneumatically controlled separator ,complete with photocell to check the maximum and minimum amount of frames with manual adjustment of guides;
- Electrical cabinet complete with electronic equipment (PLC) for managing and controlling the machine.
- Power rating 4kW
- Air consumption 350 NI/minute.
Dimensions of boxes :
- length of sides min 290 mm-max 60mm
- width of box front sides min 190 mm-max 400mm
- Height of corners min 60mm –max 300mm
Production:
- With 3 stitching points 2200-2350 boxes/hour
- With 4 stitching points 2000-2150 boxes/hour
- With 5 stitching points 1800-1950 boxes/hour
(The production rate depends on the height of the sides)

AUTOMATIC STITCHING MACHINE FOR BASES M.201-L
(connection of bases along the box front sides) Automatic machine assembling bases to “sides” of
frames of fruit and vegetable boxes with stitches in the corner of the bases,complete with:
2 Head/riveting groups with screw and hand wheel adjustment of width, activated by self-braking
motors.
- The stroke of the riveting groups (pneumatically controlled) is adjusted by a mechanical stop according to the height of the corners;
- 2 chains conveyor with 4 pairs of dogs,686 mm.intervals,to convey bases and frames
- Program drum determining the stitching points accelerator belt conveyor for feeding boxes onto
chain conveyor.
- Electrical cabinet complete with electronic equipment (PLC) for managing and controlling the
machine.
- Power rating 3,5kW
- Air consumption 350 Nit/minute

Maximum and minimum dimensions of boxes :
- length of sides min 290 mm-max 600 mm
- width of box front sides min 190 mm-max 400 mm
- Height of corners min 60 mm-max 300 mm
Production with 1 or 2 stitching points 2300-2400 boxes/hour

POS.09
STITCHING MACHINE FOR HANDLES M.227
Machine with 2 stitching heads to connect bars (handles) with hidden flat stitches on the four
corners of fruit and vegetable boxes. Complete with:
- 2 stitching heads controlled by self –braking motor,with continuous wire feeding and manual adjustment of width of heads;
- 3 m. belt conveyor with pneumatically controlled metering for feeding boxes
- chain conveyor with interaxial distance of 1,086., complete with 5 pairs of dogs at 495 mm intervals ,screw and hand wheel adjustment of height
- brushless motor controlling the dog conveyor
- 2 bar (handle) loaders with pneumatic pre-extraction of bars and motorised toothed rollers to drag /convey them on the guides
- width adjustment of the loaders carried out by chain conveyors
- 2 pairs of double stops with pneumatic adjustment to stop the box during stitching
- Electrical cabinet with electronic equipment to manage and control the machine.
Minimum and maximum dimensions of the boxes
- length of sides min 290 mm – max 600 mm
- length of box front sides min 190 mm – max 400 mm
- Height of corners min 60 mm – max 300 mm

POS.10
BASE FEEDER M.271 Vr. 1
Machine feeding bases made of hardboard, small peeled and sawn boards. To be connected to
stitching machines for bases. Complete with:
- Pneumatically controlled push extraction of bases
- Control calibre of base exit
- Motorised upper shaft fitted with toothed rollers. They can be adjusted in width together with the container guides by screw and hand wheel according to the length of the base.
Screw and hand wheel adjustment of pneumatic pusher according to the width of base.

Technical specifications:
Length of base 290 – 600 mm
Width of base 185 – 400 mm

Tg.Mures Moldovan Marin
07/08/2008

   Our company is Russia’s largest producer of birch lumber and specialty birch wood products. The company combines both timber harvesting and woodworking. Therefore we use modern sawmill, dry kilns and optimizing equipment. The North American techniques of sawing, grading (NHLA rules) and manufacturing guarantee for the following high quality products:

Product: FJEG (Finger Jointed Edge Glued) panels
Specie: Russian Birch
Grade: A/B (A – clear / B – heartwood & sound knots up to 3mm admitted)
Thickness: 19 mm
Width: 400 – 1200mm
Length: up to 4500mm

Product: SEG (solid edge glued) panels
Specie: Russian Birch
Grade: A/B (A – clear / B – heartwood & sound knots up to 3mm admitted)
Thickness: 19 mm
Width: 400 – 1200mm
Length: up to 2500mm

   Dear Sirs,
Our company is a large woodworking enterprise from Borisov city, Belarus. We have started our production activity in June 2006.
Our enterprise is equipped with advanced production lines:
STORTI sorting & sawing line, VALONKONE debarking line, MUHLBOCK drying chambers (1500 m3 one-time loading).
The volume of production is about 4000-5000 m3 per month.
Nowadays we produce saw-timber with different degrees of humidity (8...18%), pallet board, tiled bar (spruce, pine) .
Dimensions of KD board (8-18%) Rough (lamina):
Thickness 20...75 mm
Width 75...175 mm
Length 2700...6000 mm with interval of 300 mm.
Our main markets: Japan, Korea, (delivery by containers up to ports), Europe.
Recently we signed contract with German company WEINIG GROUP on delivery of woodworking equipment: automatic planning lines (S4S), optimization line (OptiMat), timber lengthening line (Finger-jointing), glue-laminating presses (Grecon).
In the nearest future we are expanding our product range with:
-glued planed balk for construction details; glued planed wall beam; window beam; board in running meters; lining; battens etc.
If you have interest, please, let us know.
Best regards

   Dear Sirs,

We are one of the largest woodworking enterprises in Ukraine and we offer spruce sawn timber. It is produced on
modern German equipment what ensures precise cutting and high quality of the end product.

Looking forward to your orders!

   Dear Sirs,
Our company is a large woodworking enterprise S WOOD S,
Borisov city, Belarus. We have started our production activity in June 2006.
Our enterprise is equipped with advanced production lines:
STORTI sorting & sawing line, VALONKONE debarking line, MUHLBOCK drying chambers (1500 m3 one-time loading).
The volume of production is about 4000-5000 m3 per month.
Nowadays we produce saw-timber with different degrees of humidity (8...18%), pallet board, tiled bar (spruce, pine) .
Dimensions of KD board (8-18%) Rough (lamina):
Thickness 20...75 mm
Width 75...175 mm
Length 2700...6000 mm with interval of 300 mm.
Our main markets: Japan, Korea, (delivery by containers up to ports), Europe.
Recently we signed contract with German company WEINIG GROUP on delivery of woodworking equipment: automatic planning lines (S4S), optimization line (OptiMat), timber lengthening line (Finger-jointing), glue-laminating presses (Grecon).
In the nearest future we are expanding our product range with:
-glued planed balk for construction details; glued planed wall beam; window beam; board in running meters; lining; battens etc.
If you have interest, please, let us know.
Best regards,
S WOOD S
Tel/fax:
+375 177 76 65 39
+375 177 757 827
office@swoods.biz
www.swoods.biz

   Dear sirs!

Our large woodworking enterprise is situated in Belarus, Borisov city. Our production facilities occupy an area of more than 10 hectares and are equipped with the latest available modern machinery:
STORTI sawing, sorting and debarking line, sorting and sawing logs of 14 - 36 cm in diameter in total of 10 000 m3 per month; MULBOCK dry kiln complex with 12 drying chamber (1500 m3 one-time loading).
Currently we manufacture and deliver high quality kiln dried (8-18) edge-surfaced coniferous sawn timber (spruce, pine, larch) of various sizes with length up to 6 m., as well as pallet board.
In the nearest future we are expanding our product range with:
- glued planed balk for construction details, thickness up to 1500 mm, width up to 300 mm; length up to 12 m.
- glued planed wall beam, thickness up to 300 mm, width up to 300 mm; length up to 12 m;
- planed, glued wall beam, window beam, board in running meters, lining, battens etc.
The average volume of production is about 2 500 m3 per month.
In order to define required technological capacities of equipment which we are going to buy, as well as in order to organize our production program for this 2007 year define the volume & production assortment, our enterprise conducts the analysis of market requirements & organizes orders from buyers.
If you are interested in our products, please, send us your specifications or contact us.
With hope for long-term & mutually beneficial cooperation.

Best regards

   Joint stock company is producer of solid wood flooring in Ukraine. Now we are looking for business partners in woodworking branch. The purpose is manufacturing and selling of frieze, hardwood flooring, rotary cut veneer, and sliced veneer, glued plywood and other products from beech. We can produce these products according your order. We can rent your equipment for further buying, and may be on the basis leasing.
0ur expierence in woodworking branch is more than 40 years.