afacerilemn/woodbusinessportal

Export timber, dead pine, cfr - Demands and Offers for wood and wood products.

WoodBusinessPortal.com > Demands-Offers > Id 433380
Demands-Offers Demands-Offers

31 October 2020
Member authentication
UserUser
PasswordPassword
no password?
Company contact data Locate on map Images
Export timber, dead pine, cfr
Kiev%2CUkraine
You can use the following languages for the commercial correspondence:
English - Pyccкий -

Sell

Export timber, dead pine, cfr

ID 433380 Product:
Species: Pine (Pinus sylvestris) - Redwood
Seller: ТЕКТ Investment Company
Country of origin: Ukraine
Price: 220 USD per m3
Valid unit: up to 31.12.2017

Specifications:
Volume: 700 m3 per month
Drying: KD (Kiln dry)
Moisture content: 16-18%
Quality: I (A1)
Certification: Nordic softwood grading rules / Blue book
Grading system: Ukrainian sawn timber : grading rules acc. to GOST 8486-86
Dimensions: Thickness, mm Width, mm Length, mm
19 119 3600
24 139 3600
36 88 3600
36 139 3600

Dimensions, moisture level, packaging, and modes of delivery are adjustable to the customer needs.
Description:
TEKT Investment Company engaged in supplying high quality certified spruce timber from Ukraine. We are looking for international buyers in order to build new and long-term cooperations.
Please find some information about our product below:
Quality:
 a non-Western knot is allowed. Blue stain without restrictions, holes from the bark beetle: no more than 2 holes per running meter. Stock thickness and width: 0/+2 mm;
 edging timber should be equal, all sides of the board should be rectangular in shape, have the same dimensions along the entire length of the board, all boards in the pack must be the same size; sawn wood must be made on a disk sawmill;
 all cutting angles should be 90 degrees;
 the timber must be detached from both sides;
 chainsaw cutting is not allowed;
 is not allowed: one-sided or two-sided eased arris, fiddie back grain, rot, blue stain, bore hole, mould, dead-and-down, mechanical damage to the board, dropping, loose and unsound knots, dirt, sawdust in packs. Also, geometric deformation of the board during the drying process is not allowed. Damage to wood bark beetles is strictly prohibited.
Packaging:
 after sawing the timber is bundled with a gasket through each row. Each pack must have 4 turns of polypropylene tape. For each row there are 4 interlines of the same size. As a gasket, a veneer of 1 cm x 5 cm is used.


Payment and delivery:
Terms of payment: LC at sight/prepayment
Incoterms 2010 FOB, CFR
Product:
Species: Pine (Pinus sylvestris) - Redwood
Seller: ТЕКТ Investment Company
Country of origin: Ukraine
Price: 220 USD per m3
Valid unit: up to 31.12.2017

Specifications:
Volume: 700 m3 per month
Drying: KD (Kiln dry)
Moisture content: 16-18%
Quality: I (A1)
Certification: Nordic softwood grading rules / Blue book
Grading system: Ukrainian sawn timber : grading rules acc. to GOST 8486-86
Dimensions: Thickness, mm Width, mm Length, mm
19 119 3600
24 139 3600
36 88 3600
36 139 3600

Dimensions, moisture level, packaging, and modes of delivery are adjustable to the customer needs.
Description:
TEKT Investment Company engaged in supplying high quality certified spruce timber from Ukraine. We are looking for international buyers in order to build new and long-term cooperations.
Please find some information about our product below:
Quality:
 a non-Western knot is allowed. Blue stain without restrictions, holes from the bark beetle: no more than 2 holes per running meter. Stock thickness and width: 0/+2 mm;
 edging timber should be equal, all sides of the board should be rectangular in shape, have the same dimensions along the entire length of the board, all boards in the pack must be the same size; sawn wood must be made on a disk sawmill;
 all cutting angles should be 90 degrees;
 the timber must be detached from both sides;
 chainsaw cutting is not allowed;
 is not allowed: one-sided or two-sided eased arris, fiddie back grain, rot, blue stain, bore hole, mould, dead-and-down, mechanical damage to the board, dropping, loose and unsound knots, dirt, sawdust in packs. Also, geometric deformation of the board during the drying process is not allowed. Damage to wood bark beetles is strictly prohibited.
Packaging:
 after sawing the timber is bundled with a gasket through each row. Each pack must have 4 turns of polypropylene tape. For each row there are 4 interlines of the same size. As a gasket, a veneer of 1 cm x 5 cm is used.


Payment and delivery:
Terms of payment: LC at sight/prepayment
Incoterms 2010 FOB, CFR
Export timber, dead pine, cfr
Quantity Units Delivery Incoterms
100 m3 CFR
Price Currency Delivery frequency
220 USD monthly
Export timber, dead pine, cfr
Export timber, dead pine, cfr
Published on 2017-05-04
Expires on 2017-12-31
Send a message to this company
Your message ( please send only text message; in order to avoid spams the messages written in html code will not be sent)
Send message
safe trade